Stealth Cam
 Stealth Cam Delta 8 Trail Camera Q8X US $36.00 
|
 Stealth Cam SD Card Viewer CRV2X US $20.50
|
 WILDVIEW STEALTH Xtreme X8IR 80MP INFRARED DEER GAME CAM CAMERA FAST TRIGGER US $17.19
|
Stealth Cam
I'm building my first motor, a Ford 302 in a 69 Mustang. What heads should I use?
I'm building my first motor, a 302 Windsor to go in a 1969 Mustang. So far I have a Comp Cams XTreme energy .262 duration, Holley Street Avenger 600cfm, Weiand Stealth manifold, long tube hooker headers, and 2.5 inch dual exhaust... along with the usual new lifters, etc. What heads would you recommend? Is aluminum superior to steel?
The car will be a street car. My goal is to have about 300 horses. I want it to sound good and be powerful enough to smoke the tires, but it will be used for summer driving / cruising, not racing.
What's the difference between Edelbrock's Performer and Performer RPM heads?
FYI - I'm in Canada... in a region without vehicle inspections or emissions testing.
That's a good size cam, I assume your going naturally aspirated? I would go with a 195 or a 205 head to provide good low end torque and mid-range power for the street. make sure you use a push-rod checker when you install the heads and make sure the valve springs work with the cam. The RPm heads have a different range as far as higher RPM's either head would work ok aluminum heads weigh less so a little weight off the engine and easier to lift. You should be able to hit 300hp with that set up just tune the carb and set the timing make sure you degree the cam as well.
For More Stealth Cam Info Click On The Blue Links Below
Many thanks for reading our Stealth Cam article